Changelog / BBR SimRacing

v1.5.3

Added

Added a new API endpoint to list championships. You can view this endpoint at /api/championship/list.json.

Fixed

Fixed an issue where the Championship page may not load past the Championship Overview table.

v1.5.2

Added

The Championship Overview table will now display “DQ” for drivers who have been disqualified from an event.

Fixed

Fixes an issue that prevented the “Subscribe to Calendar feed” link from working.

v1.5.1

Added

Added a new “Automatically Stop Server On Event Completion” option to Championships. This can be used to stop the server after a Championship event has completed.

Fixed

The popover text for the “Start Practice Session” button in a Championship now correctly displays the configured Looping Practice Session Duration.
Fixed an issue where Championship Event results files would not be detected by the Championship system in some timezones.

v1.5.0

Added

Session duration is now automatically limited to a maximum of one week.
Saved Leaderboards can now be imported to Championships, allowing points to be allocated based on Leaderboard standings. Please note that points from leaderboards will not be ignored by the “Ignore X Worst Events” system.
The Manager will now check for an entrylist.json file in the defined Central Entry List Path before writing the path in to the server config. This allows the path to always be set in the Server Options but for the server to fall back to the Event/Championship Entry List if the Central Entry List Path file is not present.

v1.4.6

Added

Added a “Lap Count” column to the Leaderboards table. Also added a “Include invalid laps” Leaderboard Filter.
Added Overall Results Statistics, available via the Statistics tab on the Results list page.

Fixed

Fixed an issue where the ACC Connector Join Link would not work correctly in some scenarios.
Fixed an issue where specifying multiple ACC Server ports may not work in a multi-server setup.
Fixed a rare issue that could cause the Manager to stop picking up new results when Discord notifications were enabled.

v1.4.5

Added

Added new Discord notifications for Session Results. These notifications include session information, podium and a breakdown of the top 10 drivers in each class. You can enable these notifications in the “Discord Webhook Notify On” settings in the Server Options.
Minor tweaks to Server Manager’s default theme and display improvements on mobile devices.
Drivers that do not complete a race session (DNS, Disqualified or did not meet Required Race Time Percentage) will now go to the back of the grid for inverse grid races.
Added driver stats pages that show overall stats and recent event information for a given driver, accessed by clicking the driver name in any leaderboard or from the driver/team card header in session results.
Improved the display of multi-class results in results pages.
Added the ability to use date ranges when searching for results and in the results list API. Format is documented in Search Help on the Results list page.

Fixed

Fixed a rare issue where the results list page would not load correctly.
Fixed an issue where the icons in the WYSIWYG editor would not display correctly.
Fixed an issue where sessions with no valid laps (but some invalid laps) would not display correctly.
Fixed an issue where the port used for the ACC Connector Join Link may be incorrect, also added a separate Join Link permission for Accounts.
Fixed an error that could occur when cleaning up migrated Audit Log entries.

v1.4.4

Added

Added an “Edit Default Preset” button to the Manager Options page. You can use this to edit the default values for all Presets and Championship Events.
If no name is specified when creating a Preset, a name is automatically generated based on the Preset’s configuration.
Adds support for changing the Server Process CPU Affinity. This option allows you to specify which cores the server process is run on.
Driver Points penalties can now be given from the points tables of each Championship Event as well as globally from the main Championship points table. Penalties given in an event can optionally have an attached reason that can be viewed by drivers and admins by hovering over the Event Points Penalty badge.
Right clicking a tab and then clicking “Copy Link” will now generate a link that will take a user directly to the contents of that tab when they click the link (for example a race result tab in a Championship).

Fixed

The ChampionshipName variable in the Server Name Template will now be set properly for Championship Looping Practice events.
Drivers that are counted as DNS (are present in the results but have completed 0 laps) will no longer be awarded Championship points.
Fixed an issue where some Server Options would not be applied to Quick events (including medal/rating requirements).

v1.4.3

Fixed

Reverted the results download behaviour to match the behaviour of ACC Server Manager v1.4.0 and earlier:
- The “Download Results” button and /server/<server ID>/results/download/<filename> endpoint now encode the results JSON data in UTF8 format.
- If you want to download the results files in UTF16-LE encoding to match the behaviour of v1.4.1, you can do this by adding the ?encoding=utf16-le parameter to the URL, for example: /server/3/results/download/250320_222710_R2.json?encoding=utf16-le.
Fixed an issue where server information was not correctly associated to results files.
Fixed an issue where port information on the Manager Options page may be incorrect.

v1.4.2

Fixed

Fixed an issue where Championship classes always defaulted to car class instead of using the selected “Class Type” for the Championship. If you have Championship events that have been affected by this issue, you can fix them by re-importing the results to the event with the “Keep Class Data?” switch disabled.

v1.4.1

Added

Added an improved results management system. This new results system reads the results data from the game’s results files and stores them in a database.
- Improved loading times of the results listing page and results files themselves.
- Improved the layout and readability of results pages.
- Added a manual, unscheduled maintenance task that can be used to add missing results from the results folder(s) to the results database.
Added leaderboards to let you view the fastest lap times recorded in the results files of your Server Manager. You can now view fastest lap times, filtered by the following categories: track, car class, session type, driver, start and end dates, preset, championship, server and car model.
- You can save leaderboard filters with a name and description, so that they can be viewed by any of your drivers.
- Leaderboards can be exported as CSV files.
Adds support for changing the Server Process Priority on Windows. This option allows you to choose the priority that the operating system assigns to the server process. Higher priority processes can receive more CPU time, but this is not a guarantee (especially on an overloaded system).
Added a fallback method for Driver Category class sorting in Championships. If the class for a driver cannot be found, Server Manager will look at the other drivers in the car to find their Driver Category.
Added “Join with ACC Connector” button to the active event card on the home page which will automatically generate a join link compatible with the ACC Connector tool (https://github.com/lonemeow/acc-connector), which allows drivers to directly connect to the server even when the ACC lobby server is unavailable.
Added a server ID indicator to the multi-server dropdown.
Improved the Audit Logs functionality in the Server Manager:
- Audit Logs now store details of how data has changed. These can be viewed by clicking on the “Expand” button on an entry in the Audit Logs page.
- Audit Logs will now contain more accurate data about which user changed an item, and fewer entries that are not useful for investigating changes.
- Changes made by internal Server Manager systems (e.g. process management, scheduler, migrations, maintenance tasks) are now visible in Audit Logs pages.
- Added pagination to the Audit Logs page.
- Audit Log entries older than 60 days are cleaned up automatically by a maintenance task.
Added a Clear Results function to Championship Events.
Added the ability to create a new server using an existing server as a template, using the “Use as Template” buttons on the Manager Options page.
Looping Practice Session Duration can now be configured in the Championship settings form.
Added “API Access Control Allow Origin” to Server Options, which can be used to allow cross origin requests to the json API endpoints of the Manager.

Fixed

Importing results but leaving all results select inputs as “None” will no longer remove all sessions from a Championship Event.
The selected BoP Preset will now be properly displayed in Event Details for Championship Events.
Fixed an issue where Championship Team points may not be calculated correctly for events with multiple race sessions.
Fixed an issue where the Debug Bundle would not contain server log files.

v1.4.0

Added

Added support for multi-server configuration from within the Server Manager itself. This is a major change - we strongly recommend backing up your existing Server Manager installation before upgrading. Multi-server management is completely integrated into the Server Manager.
- Added a multi-server dropdown to the navigation which shows the status of any servers, with controls to restart or stop the event, view logs and edit the server options.
- On the homepage, the Current Event details widget has been updated to display the status of all servers that are running.
- When starting or scheduling an event, you can select the server that you want the event to run on.
- You can add and remove servers via the new “Manager Options” page in the Server Manager.
- Existing single-server setups are migrated to a new location for compatibility with this change (even if you don’t add a new server). You can find your server details (including any results files) in _manager/servers/server_0 inside your install_path.
Added icons to buttons across the Server Manager for improved usability and consistency.
Scheduled Presets will now display recurrence information in the Preset list, and all instances of a recurring Preset will be shown in the Calendar.
Added Ballast information to drivers in results, also added ballast to drivers in results export.
Improved Server Manager’s data store to be more reliable, and faster on some systems.
Added a validator to ensure that the Server Password, Admin Password and Spectator password are all unique on Server Options save.
Added improved print styles for results pages.
Current final server configuration files are now added to the Debug Bundle.

Fixed

Fixed an issue where cancelling an already stopped Championship Event would stop any running events on the server.
The cookie consent popup now dismisses without needing a page reload.
Fixed an issue where the Championship ID would not be correctly associated to a results file on manual import.
Championship results import now shows the track name rather than the track ID.
Improved accuracy of connected driver count indicator.
The Sign Up Form can now handle switching a driver to be the primary driver when they update their registration.
Fixed an issue that could prevent a driver from switching cars when updating their registration.

Removed

Removed the “View Config” permission. Configuration files are now visible on the Server Logs page.
It is no longer possible to select an Entry List in the Quick Race page. We recommend using a Preset or Championship for any events that need an Entry List.

v1.3.3

Added

Added an Intro Wizard to guide new users through configuring important settings for their Manager.
Results will now indicate if the session had any wet conditions.
Championships are now separated into Active and Completed sections based on progress.
The Current Event card on the home page will now display the active session and how many drivers are currently connected to the server.
The Championship standings API endpoint now shows a more detailed breakdown of driver points allocation to a team, as well as which events (if any) were ignored in the Team Standings calculations.

Fixed

Improved the readability of the Current Config page.
Fixed an issue where the “Ignore X Worst Events” Championship setting would not correctly apply to teams in some circumstances.

v1.3.2

Added

Results tables and some Championship tables now have individual column sorting, including sorting multiple columns simultaneously by holding Shift and clicking on multiple.
Improved the handling of Championship points for cars with multiple drivers (e.g. in driver swaps). If you have a Championship where you used driver swaps, you can re-import the results to the Championship to take advantage of this new feature. Newly created Championships will display multiple driver information automatically.
- Driver Standings now have entries for every driver in a car, factoring in their points from all cars they have driven during the Championship.
- Driver Standings now handle multiple drivers in a team having the same number of points, displaying them with the same position in the Championship.
- Team Standings now correctly handle situations where a car has multiple drivers, or drivers have completed sessions in different cars.
- Event results show all drivers that took part in each session.
- Fastest Lap and Best Qualifying badges now show the individual driver in a team that won the team those points. Fastest Lap and Best Qualifying points are still allocated to the whole car, not just the individual driver.
- Added two new options when importing results to a Championship event to give more control over whether drivers classifications and teams are recalculated or preserved from the original event completion.
- Added improved handling when using the “Transfer team points from previous events?” switch when editing a Championship entry list.
- Improved the handling of team switching between Championship events.
- If team names are not specified but a car has multiple drivers, the car number is used as a team name, e.g. “Car #32”.
Added “Inverse Grid Points Multiplier” option to Championship Points, which allows a points multiplier to be applied to any inverse grid race in a Championship.
Added “Primary Driver” as an option when registering for a Championship if Allow Multiple Drivers is enabled. This allows entrants to specify themselves as the first driver in their team in the Entry List, and therefore the driver that should always join the server first. Please note that the most recent driver to register with this switch enabled will be treated as the primary driver, as reflected in the driver order in the Entrants tab and in Manage Registration requests.
Added a new “Maintenance” table in the Server Options which shows the status of maintenance tasks that are run in the Server Manager.
Improved the Server Logs page to use less data and display log updates quicker. Please note that this new method of logging requires WebSockets to be enabled. If you are using a reverse proxy, you may need to allow WebSocket “Upgrade” requests to make this behave correctly. You can learn more about this on our wiki.
Added “My Permissions” to the Account Settings page, which lists the Permissions that the user Account currently has.
Added the ability to export a Debug Bundle from the Server Logs page.
Added links to relevant Wiki Guides in the bottom right corner of the screen. You can disable this by toggling the “Show Wiki Guide Links” Server Option.
Added “Prevent Web Crawlers” to the Server Options page, enabled by default. If enabled, robots will be prohibited from indexing this manager by the robots.txt. Please note this will only deter well behaved bots, and not malware/spam bots etc.

Fixed

Improved browser caching instructions for web assets, which should lead to quicker page loads in Server Manager.
Fixed an issue where scheduled Presets may not have been removed from the calendar when manually un-scheduled.
Prevent accounts with the Admin group from lowering their own permission group.
Fixed an issue where a team’s car choice would not be loaded in when registering for a Championship in an existing car.
Fixed an issue where an existing team’s name would not be loaded in when registering for a Championship in an existing car.

v1.3.1

Added

Added support for the Ford Mustang GT3.

v1.3.0

Added

Added a new permissions system that gives you more control over what users can do with the Server Manager:
- On the Accounts pages, you can create groups and give each group different permissions.
- Each account can then be assigned one of these groups - you can assign multiple accounts to a group.
- There are three groups that are permanent:
- “No Access” group - this group has no permissions
- “Public” group - this group has all ‘read’ style permissions, but you can edit this. This group is used by any not logged-in user (if ‘Public Access’ is enabled)
- “Admin” group - this group has all permissions. The admin account has this group.
- We’ve migrated the old permissions system to this new system, so right now you don’t need to do anything. You can edit the groups to suit your needs.
Added support for the Nordschleife DLC.
Added new API endpoints to list results files and view Championship standings. You can learn more about these API endpoints in the Web API documentation.
Added support for new ACC results data:
- Post Race Penalties (shown on results page)
- Race Weekend Index
- Server Name (shown on results page)
- Leaderboard Line Car Group
- Car GUID
- Team GUID.
Improved the UI for adding Championship points - it is now possible to specify points for more than 64 places in a Championship.
The “Ignore X Worst Events” option is now applied to Team points, where the worst X events for each driver in the team will also be ignored towards the team points total.
Improved the “Remember Me” functionality in Server Manager. You can choose whether login sessions remember browsers that you log in with, and delete logged in sessions from your account settings.
Added a new config.yml option - session_name_prefix that allows you to specify a prefix for HTTP session names. This is useful if you are running multiple Server Manager instances on the same domain.
Added the ability to export and import Presets.
Added a new option to the config.yml to disable Server Manager’s monitoring. You can learn more about this by looking at the config.yml that is provided in the Server Manager update.

Fixed

Fixed an issue where Championship events may have mislabelled podium places in some rare circumstances.
Fixed an issue where updating the results search index could fail if folders were created inside the Assetto Corsa Competizione server results folder.

Removed

Removed the session_store_path setting from the config.yml. Sessions are no longer stored on the filesystem. If you need separate stores, look into using the new session_name_prefix config.yml option (above).

v1.2.17

Added

Added support for the Assetto Corsa Competizione GT2 cars and the Red Bull Ring.
Added the ability to upload multiple Balance of Performance files, which can then be selected in event configs similar to the existing Entry Lists system). The current global BoP will be saved as “Default”, and is selected by default in all event existing configs. New events created after this update will have no BoP applied by default. BoP presets can be uploaded and modified by write access users, but can only be deleted by admin access users.
Multiclass Championships now show an “Overall Standings” tab, ranking drivers by their points total regardless of class.
Added an option to select the default tab displayed to users when loading a Championship page.

Fixed

Drivers that are disqualified from Championship events will no longer receive any points for the event they have been disqualified from.

v1.2.16

Added

Added the ability to upload an external bop.json file from the Balance of Performance page.
Added the Randomize Track When Empty option to the Server Options Override settings in the Preset form.
HTTP Sessions now have a configurable Max Age (see config.yml). Filesystem session stores are automatically cleaned up when files exceed this max age.

Fixed

Fixed an issue where an empty Entry List would cause an error in the ACC server log.
Updated descriptions for “Max Drivers Count” and “Max Total Driving Time” to more accurately reflect the behaviour of the settings.
Fixed an issue where the Server Logs output could freeze on some platforms.
Updated the Discord Role ID description to correctly explain where to enable Developer mode.

v1.2.15

Added

Added improved handling of Server Logs:
- Server Logs now display in the Logs page immediately, rather than being delayed until a several log messages have been sent. Please note that this feature requires a minimum OS of Windows 10 (build 1809 or newer, or Windows Server equivalent), or any modern Linux distribution. If these requirements are not met, the previous logging method will be used.
- Server Logs now display a date and timestamp of when the log message was sent. These timestamps are also written into the manager log files.
- On Linux, we’ve added a new server option to hide the “not enough CPU power” messages that occur frequently when running the ACC Server through WINE.
- On Linux, the method used to collate the “not enough CPU power” messages has been improved - it now displays the number of warnings (if any) given by the server in a 60 second period.
- Server Logs are now highlighted in a similar way to the manager logs - errors show up in red, debug messages in grey, and warning messages in orange.
Added a tooltip for “Player ID” to explain that it is expecting a SteamID64, with an example.
Added current settings from the text files in the cfg/current folder generated by the ACC server to the Current Config page. The JSON files generated by the Manager are still available to view beneath these.

Fixed

Fixed an issue where scheduled events could be duplicated in the calendar when saved multiple times.
We’ve rewritten the switches used in forms to resolve visual bugs that could occur in repeated form elements.
Improved display of buttons on Entry Lists page.
Fixed an issue where the “Add Entrant(s)” button would not work after importing an Entry List.

v1.2.14

Added

Added the Randomize Track When Empty option to the Server Options Override settings in the Preset form.
Added “Free formation plus one ghosted cars lap” and “Default formation with position control and UI plus one ghosted cars lap” to Formation Lap Type options.
Allow new ballast range (from -40kg to 40kg) in Entry Lists.

Fixed

Fixed an issue where deleting a championship with scheduled events would leave the events in the calendar.

v1.2.13

Added

Added support for the new Automobilista 2 session options “Qualify Private Session” and “Race Mandatory Pit Stops Min Tyres”.

v1.2.12

Added

Sessions in a Preset can now be re-ordered by dragging and dropping the tab selector.
It is now possible to transfer an entrant’s previous team points in a Championship when changing their team. When editing the Team Name, a checkbox will appear asking if you would like to “Transfer team points from previous events?”.
The number of available pit boxes for a track is now shown when the track is selected in the race form (taking into account whether the server is in public or private mode).
The Calendar will now show completed events that had been scheduled.

Fixed

Fixed an issue where deleted Championships could cause unnecessary error messages (“Found orphaned Championship Event…”).
Results and Championship events now use the track name as specified by the game server.
Fixed an issue where “Register with Steam” may not work in some scenarios.
Fixed an issue where Inverse Grid Race session results could be lost on Championship event save or Championship import.
Fixed an issue where the “Current Event” card on the homepage could incorrectly label a practice session.
Fixed an issue where “Entry List” would be shown in the navigation when editing a Championship Event.
Improved description of Max Car Slots option to make limits in different scenarios more clear.
Fixed an issue where drivers would not be able to register to a Championship when “Let users choose Entrant and Car” was disabled.
Improved sorting behaviour when applying penalties, penalties applied to drivers that are one lap or more down from the leaders should now work as expected more consistently.

v1.2.11

Added

Added support for the new Assetto Corsa Competizione update containing the McLaren 720S GT3 Evo 2023.

v1.2.10

Added

Added support for the Assetto Corsa Competizione v1.9 update, including the new DLC track (Valencia) and cars (Ferrari 296 GT3, Lamborghini Huracan Evo2 and Porsche 992 GT3 R).
It is now possible to set a custom favicon for the Server Manager. Check out the “Favicon URL” setting in the Server Options for more information.

Fixed

Fixed an issue where it could become impossible to sort a driver into an exact position with time penalties in a Championship when the drivers behind them were one lap or more down.
Championship time penalties can now by given with accuracy to two decimal places.
Improved javascript support for older browsers.

v1.2.9

Added

Added the ability to download results within a specified date range from the Manage Results tab on the Results page (previously it was only possible to download all results at once).

Fixed

Fixed an issue where editing the “Session Type” of a Championship event session would result in an extra session being incorrectly shown in the event overview.
Corrected the help text shown for the Race Number input in Sign Up Forms.
Class winners are now only shown for race events in Championship Event cards.
Fixed an issue where events in the example Championship could not be saved in some scenarios.
Fixed an issue where it was not possible to give a driver a time penalty in a Championship if they did not have a valid best lap time.
Fixed an issue where penalty controls would appear (but not be functional) for read-only users in Championship forms.
Improved the loading times of pages and assets in the Server Manager.
Fixed an issue where some date/time inputs could be overridden by an events scheduled time when editing an already-scheduled event.
Made the system that auto-restarts events after the Manager is forcibly stopped more reliable by accounting for a few rare cases.

v1.2.8

Added

When importing results to a Championship event you can now select None (session will be deleted from event) as an option. If selected the session will be removed from the Championship event.

Fixed

Fixed an issue where an invalid JSON file in the custom cars folder would cause the page to fail to load.

v1.2.7

Fixed

Fixes an issue where empty results files could cause the results page to fail to load.

v1.2.6

Added

Car race numbers are now shown in Championship results.
When adding or removing time penalties from a Championship the page will automatically scroll back to the correct session results after applying the penalty.
Presets can now be starred.
Added quick search buttons to the Preset list page, allowing you to quickly find scheduled or starred presets.

Fixed

Fixed an issue where a time penalty given to the lead driver could result in that driver not being given any points.
JSON files placed in the results folder that are not results should no longer cause the Manager to crash.

v1.2.5

Fixed

Fixed an issue where pagination links were not visible in search results.
Fixed an issue where it was not possible to upload images to Championship descriptions.

v1.2.4

Added

Added a new navigation sidebar to Presets, Championships and Options pages to speed up navigation within these pages.
Championship points can now be specified as decimal numbers.
Imported entry lists will now retain the nationality field.
Added a cookie policy and a cookie banner that is shown when visiting Server Manager for the first time.
Added Cross Site Request Forgery protection to all forms in Server Manager. This is a security feature, and is enabled by default. If you are scripting HTTP Form POSTs to Server Manager, you can turn this setting off using the disable_csrf_protection option in the config.yml.

Fixed

Fixed an issue where presets that have been imported into Championships would not be duplicated correctly.
Fixed an issue where deleting a Championship would not remove the Championship Events from the scheduler.
Fixed an issue where “Best Qualifying” Championship points were not factored into the “Ignore Worst Events” calculation.
Fixed an issue where the Championship Event points multiplier may not be factored into the “Ignore Worst Events” calculation.
Fixed an issue where Championship points would not display as decimals.
Fixed an issue where Championship events would not be properly marked as completed in some circumstances.
Google Fonts are now embedded in the app rather than being loaded from the Google API for improved user privacy.
Fixed an issue where drivers that were disqualified mid-session would be un-disqualified if another driver was given a post-session penalty in the Championship Event.
Fixed an issue where Championship team penalty popups would not open for some team names.
Fixed an issue where it was not possible to add a penalty to some teams in a Championship.
Fixed an issue where BoP values would not be saved properly in some scenarios.

v1.2.3

Fixed

Fixed an issue where Championship Team standings would not be displayed in certain circumstances.

v1.2.2

Added

Register with Steam now uses the base_url set in the config.yml to redirect a user back to the correct Server Manager instance.
Added executable_name to config.yml, which can be used to override the server executable name if you need to change it for any reason. If left blank then the default server executable name will be used as before.
Some password inputs (excluding accounts) can now be shown/hidden in the form using the eye icon on the right.
Improved the handling of drivers or teams with equal points in a Championship. If a driver or team are equal on points, their position is determined by a count back of best finishing positions. The order is determined by the driver or team that scored the most wins. If these are equal, the number second places are compared, then third places, etc.
Added “Override Password” and “Replacement Password” options to race forms, if “Override Password” is enabled then the “Replacement Password” will be used for that event.

Fixed

Fixes an issue where entrant race number would not be set for inverse grid races if a Championship did not have a locked entry list.
Fixes an issue where Custom Car settings did not work when importing an Entry List.
Fixes an issue where the “Max Car Slots” value would display incorrectly in the “Event Details” popup of a Championship event.
Fixes an issue where Championship Penalties would be incorrectly applied to the individual event points tables.
Fixes an issue where searching in a multiselect was not possible.

v1.2.1

Added

Adds support for the American Track Pack DLC tracks.
Added the ability to delete results and entry lists from their respective list pages. Also added download buttons to the list pages.
Entry Lists can now be selected in the Quick Race form.
Added a “Subscribe to Calendar Feed” option to the Calendar page, which provides an iCal feed of the scheduled events on the server.

Fixed

The “Download as JSON” buttons for Results and Entry Lists now trigger a download, rather than displaying the content in the browser.
Fixes an issue where duplicating a Championship would not correctly duplicate events within the Championship.
Fixes an issue where the scheduled time for a Preset would not be converted to the local time of the user editing the Preset.

v1.2.0

Added

Added search functionality to the Preset list page. The search indices can be rebuilt from the Server Options page, this may be necessary if you manually edit, add or remove any Preset files.
Added an option to duplicate a Championship. All settings, entrants and events will be duplicated. Results, points and championship progress will not be duplicated.

Fixed

Fixes an issue where inverse grid races in a Championship with force entry list turned off would generate an incorrect entry list.
Fixes an issue where the “Ask users for Team?” option would not persist in the Championship Sign Up Form settings.

v1.1.8

Fixed

Fixes an issue where a Championship Inverse Grid event start could cause a crash due to certain driver names.
Fixes an issue where Custom Car files with Byte Order Marks could prevent editing of Presets and Entrylists.

v1.1.7

Fixed

Fixes an issue where Championship Sign Up would assign the wrong car to a registration request if the “Available Cars” setting was not being used.

v1.1.6

Added

Added multiclass Championships. You can enable this feature in the edit Championship screen.
- The “Class Type” option in the Championship settings allows you to choose between three options for determining an entrant’s class:
- Car Class - Uses the car classes in Assetto Corsa Competizione
- Cup Category - Uses the entrant’s cup category
- Driver Category - Uses the category of the last driver in the car (defined in the Entry List)
- Currently, all classes have the same points settings. We may split these out in the future.
- Results and points are displayed per class on the Championship screen.
- Toggling the multiclass settings will trigger a re-import of all existing completed events in the Championship.
Entry List uploads are now much more permissive, accepting files with invalid name formats or incorrect Byte Order Marks.
Added a button to download all ACC results files together in a zip.
Added support for uploading Custom Car files. These can be used to set car liveries in a locked entry list event. Please note that ACC Server Manager does not support distributing liveries to drivers, as the ACC server is not capable of this.
It is now possible to limit car choice in Championship Sign Up Forms to a preselected list of cars. Check out the “Available Cars” option in the Championship settings.
Championship Sign Up forms now allow entrants to register with a team name.
Championships now show team names in the Driver Standings and Entrants tables if the Championship has teams.
Event Presets can now be imported to Championships.
Discord notification options now take the entire webhook URL (as provided by the Discord webhook setup process) instead of asking the user to extract specific values from the URL.
Added Event Details button to Championship events.
Added search functionality to Results pages. The search indices can be rebuilt from the Server Options page, this may be necessary if you manually edit, add or remove any results files.
It is now possible to reorder Championship events by dragging the top bar of the event.
Added a new “Auto” theme mode, which chooses dark or light mode based on your operating system’s preference.
Championship export is now limited to users with write permissions and above.
On event start and restart, you will now be directed to the Logs page. This page is useful for debugging any issues you may have with the server or manager.
Added the ability to apply time penalties to drivers in Championship Events.

Fixed

If a logged-in user attempts to access the login page they will be redirected to the home page.
Fixed an issue where entry lists with invalid name formats could cause an error on results page load.
Account details (name, Steam GUID) will now be autofilled to sign up forms if they are set.
Events with multiple of the same session type (e.g. two races) should now be picked up on Championship complete.
When “Use Shortened Driver Names” is enabled Championship overview tables will now show the shortened name rather than only the initial of the last name.
Open in Simresults link will now work more reliably on page load.
Fixes an issue where data would not be formatted correctly in the Championship Entrants CSV export.
Fixes an issue where the team name would not be saved when editing an Entry List from the Entry Lists page.
If the “Ignore X Worst Events” option is enabled the Championship will only start ignoring events when more than the configured number of events to ignore have been completed.
Championships now look at the most recently completed events to determine a driver’s name. If a driver changes their name midway through a Championship, the standings will show their most recently used name.

v1.1.5-5

Added

This update adds support for the Assetto Corsa Competizione Server v1.8.12 update, including the new Challengers Pack DLC Cars.

v1.1.5-3

Added

This update adds support for the Assetto Corsa Competizione Server v1.8.11 update.

v1.1.5-1

Fixed

This update provides minor stability improvements to the Server Manager runtime.

v1.1.5

Added

Added “Required Race Time Percentage” option to Championship points. If a driver has not completed the required percentage of the leader’s race time, they will not receive points. This option is disabled by default.
Added “Ignore X Worst Events” option to Championships. You can use this setting to ignore the X lowest scoring events from each driver’s points tally in the Championship.
Added a Championship Overview tab that shows colour-coded points across all events in a Championship.
Added the ability to upload entry list json files, using the “Upload an Entry List” button on the Entry Lists page.
Added Event Details button to preset list and current event info. When clicked the full event configuration is shown. Also improved the shorter event details shown above the event buttons.
Environment variables are now passed to WINE commands for self-hosted customers on Linux. This means you can override properties such as WINEPREFIX and WINEARCH.
It is now possible to specify the path of both the license file and config.yml via flags when running the Server Manager executable. Run the executable with the --help flag to find out more.

Fixed

Removed option to select different year configurations for tracks, as the ACC server now enforces that the latest version is always used. Existing events will be updated to use just the track name with no year. The Custom Track Configurations input has also been removed, as it is no longer functional.
Improved reliability of inverse grid functionality, and made inverse grid names more consistent.
Fixed an issue where old results files created when track configs with the year as a suffix were valid could not be imported to new Championship events.
Fixed an issue where a driver that has already been accepted via the Sign Up Form cannot update their answers to questions, or add an answer to a new question.
Fixed an issue where drivers wouldn’t be able to register for a Championship after translating the Sign Up Form page.
Renamed “Show Event Name In Server Lobby” to “Use Server Name Template” and updated the description of the setting to make its behaviour more clear.
Fixed an issue where the Manager would stop responding on scheduled event start in some scenarios (Windows only).

v1.1.4-3

Added

This update adds support for the Assetto Corsa Competizione Server v1.8.5 update.

v1.1.4-1

Added

This update adds support for the latest version of the accServer.exe (released 25th November 2021).

v1.1.4

Added

This update adds support for the latest version of the ACC Server, released in late November 2021, including the new BMW M4 GT3, the replacement of Cup and ST classes with a single GTC class and the removal of track year selection. For now track years are still available to select via the manager, but we suggest using the base track name option (this may change as we learn more about the update).
Added the option to start an inverse grid race after any Championship event is complete, based on the results of the Race session.
Added the option to add Custom Track Configurations on the Server Options page. Once added custom configurations will be available in the track list of any custom event form. Use at your own risk, server will not display track name in lobby, track configuration may not be correct and may cause instability!
Added a warning if some values in the race form are outside the expected ranges (pit window, stint time and max total driving time).
Added the Custom CSS option, which can be used to change the style of Server Manager.
Added Calendar Default View option, which can be used to change the default view type of the Calendar.
Improved Audit Logs data. This includes details about login attempts, and scheduler actions.
Added a Championship option to start a looping practice for the next event in the list automatically when a Championship Event is completed.
Results imported to a Championship event will now set the event and session completed times based on the result times.

Fixed

Fixed an issue where sign up forms would fail to stop a driver from registering with a race number that was already in use.
Fixed an issue where event results UI could render incorrectly in multi-class events.
Fixed an issue where Championship tables would render incorrectly if some drivers had teams and others did not.
Fixed an issue where some pages would not be saved to the Audit Logs.

v1.1.3

Added

Added a Discord Notification option to send a notification with links to results files on Championship event complete.

Fixed

Fixed an issue that could cause some values in event forms to reset to defaults if set to 0.
Fixed an issue where the register button on a Championship Sign Up form could be permanently disabled.
Fixed a crash caused by saving Championships with events linked to deleted Presets.

v1.1.2

Added

Points Penalties can now be applied to drivers and teams in Championships.
Points Multipliers can now be applied to individual events in Championships.
Teams can now be set for drivers in Championships, with separate points standings for Teams.
Added an option to send notifications on Quick Event start.
Results are now shown per-class in results files. Race Numbers are also now shown.
Override Driver Info is now set automatically by ACC Server Manager when necessary.
If Championship sign ups are enabled drivers can now update and remove their entries at any point during the Championship (this can be done on the normal sign up page, entering a GUID already present in the entry list will allow for the modification of that entry).
Added an enable switch to Discord Notifications, so the notifications can be disabled without removing the webhook details.

Fixed

Server logs should now display properly in dark mode.
Fixed an issue that could cause results pages to fail to load.

v1.1.1-1

Added

This update adds support for the latest version of the accServer.exe, released on the 29th of June 2021.

v1.1.1

Added

Added Discord Notifications for multiple actions related to Presets. Discord Notifications can also be used for Championship Event related notifications. You can learn more and configure these notifications on the Server Options page.
Added global Dark Mode setting.
Added a Server Option to show the Event or Championship name in the server name.
Presets can now be scheduled with a recurrence rule.
You can now manually configure sessions inside events. For example you could now run a single event with three practice sessions in a row, followed by qualifying then a sprint race, then second qualifying and a full race. Please note that although the UI does not enforce any limits on session order some combinations will result in broken grids (for example running two race sessions directly after each other).
Added Weather Presets, some sensible defaults for different weather conditions.
Added SSL support. See the configuration file for more details on how to configure SSL.
Car Cup Category will now be shown on results pages.

Fixed

Ballast applied via BoP entries or Entry List should now be applied properly.
Fixes an issue where Max Car Slots would not work correctly.
Changed “Probably Cheated” lap warning to “Track Cut - Lap Faster than Driver’s Average”.
Fixes an issue where Championship import would not work on selfhosted installs.

v1.1.0

Added

You can now create a series of events as a single Championship!
- Create a Championship with as many events as you like.
- You can specify an Entry List for the whole Championship, or turn off “Force Entry List” if you want an Open Championship!
- You can enable Sign Up forms for a Championship, so anyone can register to the Championship!
- Set up points which will be given to drivers after each event.
- Schedule Championship Events to run automatically.
- Start a Championship Event Practice Session - a 2 hour looping event that has the same settings as your Championship Event, so drivers can get used to the conditions.
- View and share Championship results with members of the Championship!
- Give extra points for Fastest Lap and Best Qualifying.
- Set a Championship description to explain to drivers how the Championship is run.
- We’ve set up an example championship so you can see how they work!
We’ve reworked the accounts system to be more like the accounts in our Assetto Corsa Server Manager - hopefully these will be familiar!
Wait time values are now larger by default, giving drivers longer to finish their qualifying and races.

Fixed

Improved weather description text to more accurately describe the impact of each option.
Car Group Override in Presets should now take effect.
Results list page no longer displays empty results.
Improved Track Temperature description.
Fixed a bug that could cause the server log font size to decrease.
Fixed an issue where the ‘unsaved data’ warning would show on pages that have not been modified.

Removed

Sign Up Forms are no longer available in Presets. Any Presets that you had which had Sign Up Forms enabled have been recreated as Championships.

v1.0.28

Added

Supports the Assetto Corsa Competizione 1.7.6 server update.

v1.0.26

Fixed

Fixes an issue in the ACC Manager where signed up entrants could not be emailed.

v1.0.24

Added

Supports the Assetto Corsa Competizione 1.7.4 server update.

Removed

Removed “Server Version” option for Assetto Corsa Competizione servers.

v1.0.21

Added

Supports the Assetto Corsa Competizione British GT DLC tracks.
Allows for switching between ACC Server ‘latest’ and ‘1.6.1’ versions via the Server Options page. Look for the “Server Version” option.

v1.0.18

Added

Cloud Level and Rain can now be specified to more than 1 decimal place.

v1.0.17

Added

Supports ACC v1.6.1.

v1.0.16

Added

Adds support for the latest ACC update (version 1.6.0), which adds the Imola 2020 DLC, along with 2020 variants of other tracks and two new DLC cars.

v1.0.13

Added

Support for the latest ACC Multiplayer (version 1.5.9).

v1.0.12

Fixed

Updates to process management of ACC server, fixing a server crash.

v1.0.11

Added

Supports the latest ACC Multiplayer (version 1.5.8).

v1.0.9

Added

Supports the latest ACC Multiplayer.

v1.0.6

Added

Supports the latest ACC Multiplayer.

v1.0.4

Added

Supports the latest ACC Multiplayer.

v1.0.2

Added

Supports Assetto Corsa Competizione v1.5.4 multiplayer.

v1.0.1

Added

Event start notifications now warn that events may take a few minutes to appear in the server list in game.

Fixed

Minor tweaks to the navigation to better fit servers with long names.

v1.0.0

Added

Thanks for using Server Manager! This document will keep you up to date with new features and bugfixes as we add them.